A traditional high chair generally consists of a stand and a seat. The support consists of two side brackets, and the seat is attached between the two side brackets. Due to the different heights of children of different ages, the height of the seat needs to be adjusted up and down, which requires the tubing of the two side brackets to be set straight and parallel. This limits the shape of the bracket, making it impossible to model the bracket, and the setup of many functional components is limited by the bracket's shape.

The technician provides a high chair, whose bracket can be set into any feasible shape, and the other functional components of the bracket are not restricted. Technical solutions are: a high chair, including stents and seats, stents including left and right side brackets, high chairs also include parallel settings of the left and right straight tube, left and right straight tubes were fixedly connected to the left and right side of the inner side of the bracket, the seat is connected to two straight tubes; each side of the side bracket includes a side support tube, the side support tube is fixedly set inside the relative to the straight tube, each side of the side bracket also includes a connecting seat and connecting the seat fixedly connected to the rear support tube; high chair is connected to a high chair, including the side of the support pipe, side of the support pipe is fixedly set inside the relative to the straight tube, each side of the bracket also includes a connecting base and connecting base fixedly connected to the back of the support Tube; high chair connectors include the upper push handle and the lower connector, the lower end of the upper push handle with two upper holes, the lower connector upper end with the upper sleeve, the lower end of the lower side of the lower sleeve, the other side of the lateral sleeve extending inward, the lateral sleeve extends upward at the upper end of the insertion post; the upper end of the tube inserted into the upper push handle of an upper socket and fixed connection with the upper push handle, the lower end inserted into the lower end of the lower tube and the fixed connection between the two sides. Bracket also includes cross tube, cross tube of the left and right ends were inserted into both sides of the bracket under the connector of the cross sleeve; high chair on both sides of the bracket of the lower tube connected to the lower end of the u-shape, the bracket also includes the right and left feet supported on the ground, the upper end of the two feet were fixedly connected to both sides of the bracket of the lower branch tube; after the support tube includes a fixed connection between the back of the upper tube and the back of the lower tube, left and right bracket after the lower tube connected to the bottom of the upper tube of a U-shape, left and right bracket after the lower tube connected to a curved. The lower end of the left and right bracket is connected to the upper end of the lower tube into an arc; each side bracket includes a side support tube, straight tube is relatively fixed in the side support tube, each side bracket also includes the front end pivoted at the lower end of the side support tube bottom support tube, the side support tube and bottom support tube to form a U-shape; each side bracket of the highchair includes a side support tube, a straight tube is relatively fixed in the side support tube, each side bracket also includes the upper end pivoted at the upper end of the side support tube after the supporting pipe The side support tube and the rear support tube to form a u-shape; the upper and lower ends of the straight tube extends to one side of the side bracket, the upper and lower extensions are fixedly connected to the side bracket, so that the straight tube is fixedly connected to the inner side of the side bracket; left and right brackets are connected to the crossbar, two straight tubes are fixedly connected to the crossbar on the lower end of the two straight tubes, the upper end is fixedly connected to the opposite side of the side bracket, so that the two straight tubes are fixedly connected to the inside of the left and right brackets; the crossbar is connected to two straight tubes with two straight tubes and two straight tubes. High chair crossbar and the two straight tube integrated molding for u-shaped or inverted u-shaped; crossbar and the two straight tube integrated molding.

The beneficial effect of this high chair is: in the bracket on the basis of the addition of two parallel straight tube, the seat and the two straight tube connection, but not connected to the bracket, so the bracket can be any feasible shape, the bracket is not limited to the installation of other functional components.